移动加热器法生长碲锌镉晶体的组分输运与界面形貌研究

移动加热器法(THM)生长碲锌镉晶体时,界面稳定性对晶体生长的质量有很大影响。本文基于多物理场有限元仿真软件Comsol建立了THM生长碲锌镉晶体的数值模拟模型,讨论了Te边界层与组分过冷区之间的关系,对不同生长阶段的物理场、Te边界层与组分过冷区进行仿真研究,最后讨论了微重力对物理场分布的影响,并对比了微重力与正常重力下的生长界面形貌。模拟结果表明,Te边界层与组分过冷区的分布趋势是一致的,在不同生长阶段,流场中次生涡旋的位置会发生移动,从而导致生长界面的形貌随着生长的进行发生变化,同时微重力条件下形成的生长界面形貌最有利于单晶生长。因此,在晶体生长的中前期,对次生涡旋位置的控制和对组分过冷的削弱,是THM生长高质量晶体的有效方案。     

The Glass Transition of Water and Aqueous Systems

After a brief introduction of the terms supercooling, amorphous solid state, glass transition and devitrification, the known ways of production of amorphous solid water are discussed. DSC experiments with quench cooled aqueous solutions show the phenomenon of glass transition and devitrification.This revised version was published online in November 2005 with corrections to the Cover Date.     

四-α-(2，2，4-三甲基-3-戊氧基)酞菁金属配合物(M=Co，Ni，Cu，Zn)的合成与光谱性质(英)

A series of [tetra-α-(2,2,4-tirmethyl-3-pentoxy) phthalocyaninato] metal complexes(M=Co, Ni, Cu, Zn)were prepared by cyclotetramerization of 3-(2,2,4-tirmethyl-3-pentoxy)phthalonitrile with corresponding anhydrous metal salts， using 1.8-diazabicyclo[5.4.0] undec-7-ene (DBU) as the catalyst. HPLC analysis shows that one isomer predominates in the product of nickel complex, while at least two main constitutional isomers exist in the product of other metal complexes. The complexes (in the form of mixture of constitutional isomers) were characterized by elemental analyses, MS, IR and UV-Vis spectroscopy.     

Triple Self‐Sorting in Constitutional Dynamic Networks: Parallel Generation of Imine‐Based CuI,FeII, and ZnII Complexes

Three imine‐based metal complexes, having no overlap in terms of their compositions, have been simultaneously generated from the self‐sorting of a constitutional dynamic library (CDL) containing three amines, three aldehydes, and three metal salts. The hierarchical ordering of the stability of the three metal complexes assembled and the leveraging of the antagonistic and agonistic relationships existing between the constituents within the constitutional dynamic network corresponding to the CDL were pivotal in achieving the sorting. Examination of the process by NMR spectroscopy showed that the self‐sorting of the Fe^II and Zn^II complexes depended on an interplay between the thermodynamic driving forces and a kinetic trap involved in their assembly. These results also exemplify the concept of “simplexity”—the fact that the output of a self‐assembling system may be simplified by increasing its initial compositional complexity—as the two complexes could self‐sort only in the presence of the third pair of organic components, those of the Cu^I complex.     

DSC Calibration During Cooling. A survey of possible compounds

A number of compounds is investigated for DSC calibration during cooling. Adamantane and Zn show fast reversible transitions and can be applied both for temperature and for heat calibrations. A third compound, namely 4,4’-azoxyanisole, has a liquid crystal to isotropic liquid transition at 409K. This compound can be used for temperature calibration. Heat calibration with this compound is more problematic because of the small heat effect and the construction of the baseline. Other compounds like NaNO₃, In, Hg and Pb, show a slight supercooling. Nevertheless they can be used for heat calibration. The use of large samples of NaNO₃ and In gives the possibility to construct the equilibrium onset temperatures of the cooling peaks, so these two compounds are also appropriate for temperature calibration on cooling. This revised version was published online in July 2006 with corrections to the Cover Date.     

Numerical investigation of the effect of inlet condition on self‐excited oscillation of wet steam flow in a supersonic turbine cascade

Self‐excited oscillation can be induced due to the interaction between condensation process and local transonic condition in condensing flow, which is an important problem in wet steam turbine. With an Eulerian/Eulerian numerical model, the self‐excited oscillation of wet steam flow is investigated in a supersonic turbine cascade. Owing to supercritical heat addition to the subsonic flow in the convergent part of the cascade, the oscillation frequency decreases with increased inlet supercooling. Mass flow rate increases in the oscillating flow due to the greater supersaturation in condensation process, while the increase will be suppressed with the flow oscillation. Higher inlet supercooling leads to the fact that the condensation process moves upstream and the loss increases. Moreover, some predictions of oscillation effects on outflow angle and aerodynamic force are also presented. Finally, heterogeneous condensations with inlet wetness and periodic inlet conditions, as a result of the interference between stator and rotor, are discussed. Copyright © 2008 John Wiley & Sons, Ltd.     

MB2镁等四种金属材料的本构关系和动态断裂研究

采用炸药爆轰－分离飞片加载装置与电容传感技术相结合，由高速示波器连续记录靶板自由面速度剖面，通过波剖面的时间分辨测量，研究了ＭＢ＿２镁、ＬＹ－１２铝、钨合金、２１６９钢四种金属材料的动力学响应特性，给出了这几种材料在弹性－理想塑性模型假设下的本构关系，还给出了它们的动态断裂强度，并对标准化层裂强度与破坏比功、屈服强度之间的相关性进行了分析和讨论。     

Dynamic Light Scattering Studies on Crystallization of Isotactic Polystyrene from Dilute Solutions at High Supercoolings

Crystallization of isotactic polystyrene (it‐PS) from dilute solution at high supercooling has been investigated by dynamic light scattering (DLS). We successfully obtained simultaneously, in situ in solutions, the time developments of both random coils of it‐PS molecules and the growing crystals. The size of coils remains constant during growth, while the crystals pass through two stages, that is, an induction period at the early stage with very slow growth rates and a subsequent linear growth stage. It is confirmed that the temperature dependence of the linear growth rates, determined by DLS, agree well with that determined by electron microscopy. The temperature dependences of the growth rate and the inverse of induction time are dependent on the viscosity of solvent, which indicates that all dynamics are dominated by the segmental motion of polymer chains in solution at high supercoolings (low temperatures). Two possibilities are proposed for the induction period.     

温度梯度法BaY2F8晶体生长中的小面研究

采用温度梯度法生长了BaY2F8晶体,通过X射线定向仪确定晶体自发沿[001]方向生长.通过对不同截面的显微观察和分析,研究认为生长方向与竖直方向不平行是诱发(100)、(130)、(130)等小面生长的重要因素.由于温度的波动和径向温度梯度的存在,会造成晶体生长过程中的组分过冷,引发晶面上出现胞状凸起,影响了晶体的生长质量.